Hisense HS212F - 2.1 CH SoundBar With Wireless Subwoofer Quick Start

Remote Control

1. Switch the unit between ON and STANDBY mode.
2. (SOURCE)
   Select the play mode.
3. SURR
   Adjust the surround ON/OFF.
4. (BT)
   Select the Bluetooth mode.
5. EQ
   Select MUSIC/MOVIE/NEWS/SPORT/NIGHT sound e ect.
6. Skip to previous/next track in BT/USB mode.
7. VOL+/VOL- Increase/decrease the volume level.
8. Play/pause/resume playback in BT/USB mode.
   Press and hold to activate the pairing function in Bluetooth mode or disconnect the existing paired Bluetooth device.
9. BASS+/- Increase/decrease the bass level.
10. TREBLE+/- Increase/decrease the treble level.
11. DIMMER+/- Adjust display brightness.
12. (MUTE) Mute or resume the volume.

First-time use_:
Put the 2 x AAA batteries (included) into the remote control before use.

Replace the Remote Control Battery:

Do not expose the battery or battery pack to fire or other direct heat sources.

Identifying the Parts

1. Display Window
   Show the current status.
2. Remote Control Sensor
   Receive signal from the remote control.
3. (ON/OFF) Button
   Switch the unit between ON and STANDBY mode.
4. (SOURCE) Button
   Select the play mode.
5. +/- (Vol+/Vol-) Buttons
   Increase/decrease the volume level.
6. Wall Mount
   Install the wall mounting screws into the wall mount of the unit.
7. AC IN Socket
   Connect to the power supply.
8. USB Socket
   Insert the USB device to play music.
9. OPTICAL Socket
   Connect to an optical audio output on the TV.
10. AUX Socket
    Connect to an external audio device.
11. HDMI ARC Socket
    Connect to a TV via HDMI cable.
12. COAXIAL Socket
    Connect to a coaxial audio output on the TV.

Wireless Subwoofer

Connections

• Before connecting the AC power cord, ensure you have completed all other connections.

Basic Operation

Standby/On
When you first connect the main unit to the mains socket, the main unit will be in STANDBY mode.

• Press the button on the unit or on the remote control to switch the unit ON.
• Press the button again to switch the unit back to STANDBY mode.
• Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely.

Automatic Power Off Function
The unit automatically turns to STANDBY mode after about 15 minutes if the TV or the external unit is disconnected, switch off

• To switch the unit off completely, remove the mains plug from the mains socket.
• Please turn the unit o completely to save energy when not in use.

Select Modes
Press the (SOURCE) button repeatedly on the unit or on the remote control to select the OPTICAL, COAXIAL, HDMI ARC, BT(Bluetooth), USB, AUX mode. The selected mode will show on the display.

Adjust the Bass/Treble Level

• Press TREBLE +/- button to increase or decrease the treble. (treble+5 / treble–5)
• Press BASS+/- button to increase or decrease the bass. (bass+5 / bass–5)
• After about 3 seconds, the unit will exit from bass/treble setting. The display will show the current selected mode. You may now press the VOL+ / - buttons to adjust volume.

Turn the Surround Sound ON/OFF

• Press the SURR button on the remote control to turn on the surround sound. Press this button again to turn off the surround sound.

Adjust the Volume

• Press the + / - buttons on the unit or VOL+/VOLon the remote control to adjust the volume.
• If you wish to turn the sound off, the (MUTE) button on the remote control. Press the (MUTE) button again or press the VOL+ / VOL- buttons to resume normal listening.

Adjust the Brightness

• Press the DIMMER +/- buttons on the remote control to select brightness level.
• While playing, press the EQ button on the remote control to select desired preset equalizers: MUSIC, MOVIE, NEWS, SPORT, NIGHT.