Placement And Mounting; Wall Mounting (If Using Option-B) - Hisense HS216FW User Manual

Placement and Mounting

Placement
A If your TV is placed on a table, you can place
the unit on the table directly in front of the TV
stand, centered with the TV screen.
B If your TV is attached to a wall, you can mount
the unit on the wall directly below the TV
screen.

Wall Mounting (if using option-B)

Note:
- Installation must be carried out by qualified
personnel only. Incorrect assembly can
result in severe personal injury and property
damage (if you intend to install this product
yourself, you must check for installations such
as electrical wiring and plumbing that may
be buried inside the wall). It is the installer's
responsibility to verify that the wall will safely
support the total load of the unit and wall
brackets.
- Additional tools (not included) are required for
the installation.
- Do not overtighten screws.
- Keep this instruction manual for future
reference.
- Use an electronic stud finder to check the wall
type before drilling and mounting.
1
2
• To prevent injury, this apparatus must be securely
attached to the floor/wall in accordance with the
installation instructions.
• Suggested wall mounting height: ≤ 1.5 meters.
1. Drill 4 parallel holes (Ø 5.5-6 mm each according
to wall type) in the wall. The distance between
the holes should be 927 mm.
2. Firmly fix 1 dowel into each hole in the wall if
necessary. Tighten the wall mount brackets on
the wall with screws and screwdriver (included).
Make sure that they are securely installed.
3. Remove the screws at the back of the unit.
Install the wall mounting screws into the back
of the unit.
4. Lift the unit onto the wall mount brackets and
slot into place.
~50mm/2.0"
927 mm
. 1 2 '
m / 0
~ 3 m
10
A
WARNING
~3mm/0.12"
4mm/
0.16"
>25mm/0.98"
3
B