Basic Operation; Standby/On; Auto-Standby / Auto-Wake; Select Modes - Hisense HS2100 Manual

TV menu example (different models may have
different menus) :
Setting--sound--Soundbar Setting.
Soundbar Settings
EQ Modes
Sport
Surround Modes
Bass Level
Treble Level
Dimmer Level
Reset
Note:
• This function is available only when both
Soundbar and TV support Hisense Ezplay.
• This function requires Soundbar and TV
connected via HDMI ARC, and the CEC of the
TV must be trned ON.
• If everytime setting right, for the first time
connect, there would be a tip on the TV
screen to guide you find the Soundbar
setting menu.

6. Basic Operation

6.1 Standby/ON

When you first connect the main unit to the mains
socket, the main unit will be in Standby mode.
• Press the button on the unit or on the
remote control to switch the unit ON.
• Press the button again to switch the unit
back to STANDBY mode.
• Disconnect the mains plug from the mains
socket if you want to switch the unit OFF
completely.

6.2 Auto-Standby / Auto-Wake

[Auto-Standby] The soundbar automatically turns
to Standby mode after about 15 minutes if the TV or
the external soundbar is disconnected (or USB, BT
function bit playback pause), or switched off.
[Auto-Wake] If a TV or an external device is
connected (AUX / OPTICAL / HDMI ARC socket),
the unit will switch on automatically when the TV
or the external device is switched on.
Auto-standby ON/OFF
Switch the soundbar on the optical mode, double
click the (x2) and
remote control to activate and deactivate the
auto-standby:
Auto Standby
Your Soundbar has been programmed to enter
On
Standby mode automatically when no audio is
detected for 15 minutes.
You can turn off the Auto Standby to keep your
Off
Soundbar always working.
Activate and Deactivate the Auto-Wake:
Turn on the soundbar, press the[
at the same time on the soundbar to activate and
deactivate the auto-wake:
Auto-Wake
The Soundbar will wake up automatically when
On
audio input is detected.
Off The Soundbar does not wake up automatically.

6.3 Select Modes

• Press the (SOURCE) button repeatedly
on the unit or on the remote control to select
the desired mode.
• The indicator light on the front of the main
unit will show which mode is currently in use.
Mode
Lamp
Red Standby
●
Green AUX
●
Blue BT (Bluetooth)
●
Orange OPTICAL
●
White HDMI ARC
●
Yellow USB
●

6.4 Adjust the Volume

Press the VOL + / VOL- buttons on the unit or
•
on the remote control to adjust the volume.
• If you wish to turn the sound off, press the
(MUTE) button on the remote control. Press
the (MUTE) button again or press the VOL
+ / － buttons to resume normal listening.
9
(x2) buttons on the
] [ + ] button
EN
FR
ES
PT
DE
IT
PL
RO
CZ
SK
SL
HR
HU
RU
SR
BS
SQ
MK
Click to jump