Table of Contents
Advertisement
Installation -
Disassemble the camera
Before installing your camera, you have to read the following cautions.
1. You have to check whether the location can bear five times of the weight of your camera.
2. Don't let the cable to be caught in improper place or the electric line cover to be damaged.
Otherwise it may cause a breakdown or fire.
3. When installing your camera, don't allow any person to approach the installation site. If you have any valuable
things under the place, move them away.
Please take care of following cautions when
1
disassembling to use reset button :
Cable damage during the assembling
and disassembling.
Do not touch other parts.
Do not open the case for long time to prevent
moisture problem.
Reset to the Factory Default
Press the reset button for 5 seconds to return the
setup to the factory default.
Warning :
If you press the 'Reset' button, you will lose all
setting data. If needed, please, make a note for
further installation.
6
Reset Button
Advertisement
Table of Contents
