Brocade Communications Systems X6-4 Hardware Installation Manual page 39

Installing the device in the rack
1. If a door is installed on your chassis, ensure that it is removed. Refer to procedures for removing and replacing the device door
in this guide.
2. Use a hydraulic lift to raise the device to the correct level.
DANGER
Use safe lifting practices when moving the product.
3. If applicable, lock the wheels of the lift.
4. Carefully lift the device and slide it into the rack.
Brocade X6-4 Director Hardware Installation Guide
53-1004106-07
Installing the 8U Chassis Airflow Diversion or Port Side Exhaust Kit for Four-Post Racks (XBR-DCX4S-0121 and XBR-DCX4S-0130)
39