Trouble Shooting - Russell Hobbs RH1261TW Instruction Manual

Table of Contents

Advertisement

Body
Clean the outer body of your machine with warm water and a non-inflammable
cleaning agent that will not abrade the body of your machine. After rinsing with some
water, dry using a soft and dry cloth.
Drum
Do not leave metallic objects such as needles, paper clips, coins, etc. in your
machine. These objects will lead to formation of rust stains in the drum. To clean
such rust stains, use a non-chlorine cleaning agent and follow the instructions of the
manufacturers of the cleaning agent. Never use wire wool or similar hard objects for
cleaning rust stains.

Trouble Shooting

All repairing operations required for your machine should be carried out by a qualified
engineer. Contact an engineer on 01204 664 084. If your machine requires a repair
or if you cannot remove the fault by the help of the information provided as follows:
 Unplug your machine.
 Turn the tap off.
 Contact the nearest authorised service.
FAULT
Your machine does not
discharge water.
Your machine vibrates.
For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 01204 664 084
POSSIBLE CAUSE
Discharging hose clogged
or twisted.
Pump filter clogged.
Laundry settled in the
machine unevenly.
The feet of your machine
have not been adjusted.
Safety assembly fitted for
transport not
disassembled.
Less amount of laundry in
the appliance.
Your machine overloaded
with laundry or laundry
-28-
REMOVING METHODS
Check the discharging
hose.
Clean the pump filter.
Spread your laundry in the
machine evenly.
Adjust the feet on your
machine.
Disassemble the safety
assembly of your machine.
(**)
This will not block
operation of your machine.
Do not put in laundry more
than the amount

Advertisement

Table of Contents
loading

Table of Contents