Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Russell Hobbs RH1250TB
Summary of Contents for Russell Hobbs RH1250TB
-
Page 1: Instruction Manual
7KG 1200 Spin Speed Washing Machine Instruction Manual Model number: RH1250(TB)(TW)(RTG)(RTS) For Customer Services & Spare Parts please call 0845 208 8750 Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at www.productcareuk.com... -
Page 2: Table Of Contents
Contents …………………………………………………………………… 3 - 4 Safety Instructions …………………………………………………………………… 5 - 6 Before using the appliance …………………………………………………………………… 6 - 10 Installation How to use …………………………………………………………………… 11 - 17 Washing procedure & program …………………………………………………………………… 18 - 27 selection …………………………………………………………………… 28 - 31 Maintenance Removing stains ……………………………………………………………………... -
Page 3: Safety Instructions
Safety Instructions • Do not use an extension lead for this appliance. Only plug directly into a wall socket. • Do not plug in damaged plug sockets • In case the power cable becomes damaged, contact 0845 208 8750 for advice. •... -
Page 4: Safety Instructions
Safety Instructions • The appliance is not intended for use by people (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. -
Page 5: Before Using The Appliance
Before using the appliance • Transportation screws which are located at the back of the machine, must be removed before using or running the machine. You will void the manufacturer’s guarantee if these are not removed before using or running the machine •... -
Page 6: Before Using The Appliance
Before using the appliance The Back of the machine Water inlet valve Transport bolt Discharging hose Power cable For Customer Services & Spare Parts please call 0845 208 8750 Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at www.productcareuk.com... -
Page 7: Installation
Installation 1. Before operating the washing machine, remove the 4 transportation screws and rubber spacers from the back of the machine. If the screws are not removed, it may cause heavy vibration, noise and product malfunction, (voiding the guarantee). 2. Unscrew the 4 screws with a wrench, spanner or cross-tip screwdriver. Keep the 3 screw as they will need to be re-used if the machine has to be transported. - Page 8 Installation 4. Adjust the level of washing machine by the adjustable feet. Please check if there is a gap between the four adjustable feet and the floor. If there is then adjust the level of the washing machine by turning the adjustable feet. Make sure that the machine does not sway and that it is completely level.
- Page 9 Installation Electrical connection • Your washing machine is set to 220-240V and 50Hz. • The mains cord of your washing machine is equipped with a specific earthed plug. This plug should always be inserted to a earthed socket of 13 amps. The current value of the fuse should be 10 amps.
- Page 10 Installation Ordinary tap (not included) Screw-shaped tap For Customer Services & Spare Parts please call 0845 208 8750 Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at www.productcareuk.com...
- Page 11 Installation Water drainage • Never forget to install drain hose before operating your washer. • The water drain hose should be mounted at a height of minimum 60 cm, maximum 100 cm from the ground. • The end of the water drain hose can be fitted directly to the drainage hole on the back side of the washer.
-
Page 12: How To Use
How to use To obtain the best washing results, you must operate your washer properly. This section gives you this important information. Preparing clothes for washing • Close zippers, snaps, and hooks to avoid snagging other items. • Remove pin, buckles, and other hard objects to avoid scratching the washer interior. •... - Page 13 How to use • Reduce wash time when using a small load size setting. A load with only a few small items needs less wash time. • Use a large load size setting to reduce wrinkling with permanent press clothes and some synthetic knits.
- Page 14 How to use Adding detergent • Please use only the powder detergent for the front loader washing machine. • Please use the correct amount of detergent in conformity with the instruction of the detergent manufacturer. • Using a large amount of detergent, more than the recommended amount, can cause lots of soapsuds and will overload to the motor.
- Page 15 How to use Detergent drawer Program dial Electronic display & auxiliary function Select the required washing programme by rotating the programme dial in either direction (clockwise or anti-clockwise). Ensure that the programme dial is aligned with the required programme. Once the correct program with the correct temperature and spin speed has been selected, and the door is closed.
- Page 16 How to use The electronic display will detail the below information when a programme is selected, during a programme and after a programme has finished: 1. Water temperature. 2. Spin speed. 3. Washing time of the programme selected (it will show the time remaining once the programme is started).
- Page 17 How to use Before Use • Plug the machine • Ensure the inlet hose is connected correct and turn the inlet valve from its closed position to the open position. • Check that the drainage pipe is connected correctly. • Open the machine door. •...
- Page 18 How to use Half Load Detection • Your machine features a half-load detection system. If you put laundry into the machine that is approximately half or less than half of the maximum laundry capacity stated for your machine. • It will run so as to save washing time, water consumption and energy in certain programmes, (Cotton 95°, Cotton 60°, Cotton 40°).
-
Page 19: Washing Procedure & Program
Washing procedure & program selection... - Page 20 Washing procedure & program selection Auxiliary functions Spin speed You can set the spin speed for your laundry via the spin speed button. When you select a new programme, the maximum spin speed of the programme you have selected will be shown on the electronic display.
- Page 21 Washing procedure & program selection • Press the Start/pause button, turn the programme dial to ‘Stop’, select the spin programme on the programme dial. You can then to reduce the spin speed by pressing the spin speed button. • You can start your machine by pressing on Start/pause button. Your machine will finish the programme after spinning your laundry at the speed you have selected.
- Page 22 Washing procedure & program selection Rapid wash You can select the washing water temperature with the temperature adjustment button. If you put laundry in that is only equivalent to half or less than half of the laundry capacity of the washing programme you have selected in your machine.
- Page 23 Washing procedure & program selection Delay By using this function, you can delay the start of your washing programme between 30 minutes and 23 hours To use the delay timer function: • Press the time delay button once • “0.5h” will appear on the display. •...
- Page 24 Washing procedure & program selection Anti allergy In the programmes where this function is active, your machine will perform an extra rinsing operation on your laundry prior to the last rinsing operation Note The anti-Allergy function is selected automatically only in Baby wear programme. Start/pause By pressing the Start/pause button, you may start the programme you have selected or suspend a running...
- Page 25 Washing procedure & program selection Adding/Removing Laundry If you want to add or remove laundry when your machine is running: • Press the Start/pause button to put the machine in to pause mode. • After a while, the symbol will be shown on the electronic diplay and this means that the door of your machine can now be opened.
- Page 26 Washing procedure & program selection • The symbol will flash on the electronic display when the child lock is activated. • If any button is pressed while the child lock is active, the symbol will blink on the electronic display. •...
-
Page 27: Washing Procedure & Program
Washing procedure & program selection • Leave the door of your machine open to allow the inner part of your machine to dry after removing your laundry. • Switch the programme dial to Stop. • Unplug your machine. • Turn the water faucet off. Warning Symbols Water cut off / Low Mains Pressure If the symbol... - Page 28 Washing procedure & program selection Error Messages Your machine is equipped with systems that continually self-check during washing operations and then take the necessary precautions and warn you in case of any breakdown. Trouble code Possible fault What to do Close the machine door.
-
Page 29: Maintenance
Maintenance The correct care of your washer can extend its life. This section explains how to care for your washer properly and safely. • When cleaning your machine, ensure that the machine is unplugged and the water supply is closed off. Cleaning your Washing Machine Exterior •... - Page 30 Maintenance Non-use or vacation care Operate your washer only when you are at home. If you are on vacation or don’t use your washer for an extended period of time, you should: • Unplug the power supply cord or turn off electrical power to the washer. •...
- Page 31 Maintenance Cleaning the drain filter • This drain filter is used to screen foreign objects such as threads, coins, pins, buttons etc. • If the drain filter is not cleaned regularly (after every 10 times of use), a drain problem could be caused.
- Page 32 Maintenance Cleaning the detergent case • After a while detergent and fabric softeners leave a deposit in the case; • It should be cleaned from time to time with a jet of running water. If necessary it can be removed completely from the machine by pressing the catch downwards and by pulling it out.
-
Page 33: Removing Stains
Removing stains Stained, heavily-soiled, or greasy items may need to be prewashed or soaked for best results. Soaking helps remove protein-type stains like blood, milk or grass. Prewashing helps loosen soil before washing. Stain removal rules • Use warm water for soaking or prewashing stained laundry. Hot water can set stains. •... -
Page 34: Trouble Shooting
Trouble shooting • All repairs to your machine should be carried out by a qualified engineer or by an appointed engineer from Product Care, (0845 208 8750). • Before contacting a qualified engineer or Product Care, please see if the problem your machine has developed can be solved with the help of the below: Fault Possible cause... - Page 35 Trouble shooting • All repairs to your machine should be carried out by a qualified engineer or by an appointed engineer from Product Care, (0845 208 8750). • Before contacting a qualified engineer or Product Care, please see if the problem your machine has developed can be solved with the help of the below: Fault Possible cause...
-
Page 36: Specification
Specification Specification Model RH1250TB Dimension (mm) (H)845 X (W)597 X (D) 527 Maximum mass of dry close (kg) Unit Weight (kg) 71.5 (Net) / 74.5 (Gross) Water pressure (Mpa) Maximum: 1 Mpa / Minimum: 0.1 Mpa Spin Speed (RPM) 1200 Operating Water Pressure 0.03MPa ~ 0.8MPa (0.3kgf/cm2 ~ 8kgf/cm2) - Page 37 Connection to the mains supply WARNING- THIS APPLIANCE MUST BE EARTHED This appliance is designed to operate from a mains supply of AC230V ~ 50HZ. Check that the voltage marked on the product corresponds with your supply voltage. This product is fitted with a 13A plug complying with BS1363. If this plug is unsuitable or needs to be replaced, please note the following: Important: The wires in the mains lead are Coloured in accordance with the following code:...
-
Page 38: Spare Parts
Spare parts Spare parts Contact details Detergent drawer Available at www.productcareuk.com call 0845 208 8750 Door Available at www.productcareuk.com call 0845 208 8750 Door seal Available at www.productcareuk.com call 0845 208 8750 Adjustable leg(s) Available at www.productcareuk.com call 0845 208 8750 Inlet hose Available at www.productcareuk.com... - Page 39 For Customer Services & Spare Parts please call 0845 208 8750 Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at www.productcareuk.com Revision 1 This symbol is known as the 'Crossed-out wheelie bin Symbol'. When this symbol is marked on a product/batteries, it means that the product/batteries should not be disposed of with your general household waste.