Table of Contents
Advertisement
TROUBLE CODE
For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 01204 664 084
Warning symbols
POSSIBLE
FAULT
- Tap may be off.
- Mains water may be cut-off.
- If so, switch the programme knob
to position 0. You can select a
programme and run your machine
after the mains water is supplied.
- Mains water pressure may be low.
Water cut-off or
- Water inlet hose may be twisted.
low mains water
- Water inlet hose may be clogged.
pressure.
- Clean water inlet hose filters.
- Valve inlet filter may be clogged.
- Clean the valve inlet filters.
If the problem persists, unplug your
machine, turn off your faucet and
contact the nearest authorised
service.
Pump is faulty
- Pump filter may be clogged. Clean
or pump filter is
the pump filter.
clogged or
- Discharging hose may be clogged
electrical
or twisted. Check the discharging
connection of
hose.
the pump is
If the problem persists, contact the
faulty.
nearest authorised service.
-31-
WHAT TO DO
Advertisement
Table of Contents
