Russell Hobbs RH1261TW Instruction Manual page 30

Unsatisfactory washing result.
Your machine is equipped with systems that continually self-check during washing
operations and then take the necessary precautions and warn you in case of any
breakdown.
(*) See the chapter regarding maintenance and cleaning of your machine.
For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 01204 664 084
The dirtiness of your laundry
does not match the programme
you have chosen.
Amount of detergent used
insufficient.
Laundry in excess of maximum
capacity put in your machine.
Error Messages
TROUBLE POSSIBLE
CODE FAULT
The door of
E01 your machine
is left open.
Pump is faulty
or pump filter
is clogged or
electrical
E03
connection of
the pump is
faulty.
Your machine
has an
excessive
E04
amount of
water.
Select the programme
appropriate for correct dirtiness
of your laundry. (see
programme table)
Adjust the amount of detergent
based on the dirt level of your
laundry.
Load your machine with
laundry, amount of which
should not exceed maximum
laundry capacity
WHAT TO DO
Close the machine door. If
your machine persists to
indicate fault, turn off your
machine, unplug it and
contact the nearest authorised
service immediately.
Clean the pump filter.
If the problem persists,
contact the nearest authorised
service. (*)
Your machine will discharge
water by itself. After the
discharging operation, turn off
your machine and unplug it.
Turn off your faucet and
contact the nearest authorised
service.
-30-