Chapter 1
Front Panel Features
F1 Power/Status/HDD LED
Power: If the LED is on it indicates that the system is powered on. If it is off, it indicates that the system is powered off.
Status: This LED is programmable. You could program it to display the operating status with the following behavior:
If the LED is green, it indicates that the system's operational state is normal. If it is red, it indicates that the system is
malfunctioning.
HDD: If the LED blinks, it indicates data access activities; otherwise, it remains off.
F2 These LEDs are indicators for the 6 Ethernet ports on the back panel.
Speed LED: If the LED is amber, it indicates that the connection speed is 1000Mbps. If the LED is green, it indicates that the
connection speed is 100Mbps. And if it is off, it indicates that the speed is 10Mbps.
Link/ACT LED: If the LED is on, it indicates that the port is active. If it blinks, it indicates that there is traffic.
Network Application Platforms
F1
F2
Introduction
3