Save & Exit; Save And Exit - Lanner FW-7551 User Manual

Chapter 4
Save & Exit

Save and Exit

Select the Exit tab from the setup screen to enter the Exit
BIOS Setup screen. You can display an Exit BIOS Setup
option by highlighting it using the <Arrow> keys. The
following table lists the options in this menu.
Item
Saving Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset This option allows you
Save Changes
Discard Changes
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
Launch EFI Shell from
filesystem device
Network Application Platforms
Options
Select this option to save
changes and exit the BIOS
menu. It will automatically
resets if the changes made
require rebooting the
system to take effect.
Select this option to discard
changes and exit and BIOS
menu to continue the
booting process.
When you have completed
the system configuration
changes, select this option
to leave setup and reboot
the computer so the new
system configuration
parameters can take effect.
to discard the selections
you made and restore the
previously saved values.
After selecting this option,
a confirmation appears.
Select Yes to discard any
changes and load the
previously saved values.
Save your changes
Discard changes
Restore to factory defaults
Save all of your changes as
an user default setting.
Loads your saved user
default setting.
This section of the Boot
Menu allows booting from a
specific device immediately.
Therefore you should see
an entry for all bootable
devices.
This option allows you to
attempt to launch the EFI
Shell application (shellx64.
efi) from one of the avail-
able filesystem devices.
Bios Settings
27