Kogan KASBD16CB User Manual page 16

Optical mode
1. Uncap an optical cable (not supplied) and connect the input end to the optical input
on the soundbar. Connect the output end to the optical digital output of your device
(for example, TV, set top box, DVD player, gaming console).
Note:
Do not bend the optical cable as this may cause damage to the cable.
2. Turn on the soundbar and connected device, then go to the device's sound settings.
Set the audio output to 'Dolby' or 'Auto' mode.
Note:
Different TVs may have different names for their settings.
3. Press the INPUT button on the soundbar or remote control until '
the display.
4. You can now begin watching TV with the sound emitting from the soundbar. Use the
remote control to make any audio adjustments.
Powering off
Press the power button (
to standby. Switch off the power at the socket and turn the soundbar off.
Replacing the batteries in the remote control
This remote control is powered by x2 AAA batteries (not supplied). To replace the batteries:
1. Slide the battery cover off the back of the remote control
2. Remove the flat batteries. Noting the polarity markers, place new batteries into the
remote control.
3. Slide on the battery cover.
16
) on the soundbar or remote control and the soundbar will return
' is shown on