Kogan KASBD16CB User Manual page 14

Bluetooth mode
1. With the soundbar on, press the INPUT button on the soundbar or remote control
until ' ' is shown on the display. You will then hear two beeps from the soundbar.
This indicates the soundbar is ready for pairing.
2. Turn the Bluetooth of your device on and search for 'KASBD16CB' on the list of
available devices. Tap on the name and connect.
3. When successfully paired, you will hear a tone before '
now be played from your device with the sound outputting from the soundbar.
Notes:
• Ensure the Bluetooth device connected is running Bluetooth 4.0 or later.
• Once a device is paired, the pairing process does not need to be repeated for
future use.
• If a connected device is further than 10m from the soundbar, the connection will
be lost and become disconnected. Your device will automatically reconnect
once it is within 10m.
• If a connected device has its Bluetooth switched off or is turned off, the
soundbar will automatically re-renter into pairing.
• Once in pairing mode, the soundbar will connect to the last connected device. If
you would like an unpaired device to be connected, disconnect the existing
connection, and repeat the pairing steps with the unpaired device.
• If no device is intended to be connected, change the mode of the soundbar or
turn it off.
USB mode
• When turned on, insert a USB into the USB port of the soundbar. The soundbar will
automatically switch to USB mode and the LED display will show '
then start playing from the soundbar.
• If the soundbar does not automatically switch to USB mode, press the INPUT button
on the soundbar or remote control until '
Note:
Ensure the files on the USB are in an MP3 format. The soundbar does not support
other file formats.
14
Bluetooth
device
' stop flashing. Music can
' is shown on the display.
'. Music will