Kogan KASBD16CB User Manual page 13

Pairing with the subwoofer
1. With the soundbar turned on, press the INPUT button on the soundbar or remote
control until '
pairing mode.
2. Connect the power cord for the subwoofer into the power socket. Switch on the
power socket. The LED indicator will start flashing slowly, indicating it is ready to pair.
3. Press and hold the WPS button. The LED indicator will start flashing rapidly. This
indicates the subwoofer is pairing to the soundbar.
4. After 20–30 seconds, the LED indicator will stop flashing and turn a solid blue. The
subwoofer is now paired to the soundbar.
Notes:
• After this initial pairing process, the subwoofer will automatically pair with the
soundbar in future uses.
• If you wish to pair the subwoofer with another soundbar, repeat the steps above.
• Keep the soundbar and subwoofer within 10m of each other. Keeping them
further apart may cause the Bluetooth connection to be lost.
• The LED indicator on the subwoofer will turn red if the soundbar is off or on
standby. The subwoofer will then enter standby.
• To avoid signal interference, keep the soundbar and subwoofer away from other
Wi-Fi connected devices.
' appears on the LED display. This will cause the soundbar to enter
13