Table of Contents
Advertisement
5
System Mode
After entering a character, the cursor automatically
moves to the next position if no key is pressed.
Alternatively press the right key.
Up to 10 characters can be added for Operator IDs,
including spaces.
To edit characters use the left/right keys to select
the desired character. Press and hold the left key
to delete the character or change the character
using the entry mode.
When the Operator ID is correct press the OK
key to create the ID and return to the Operator ID
list. The new Operator ID will be displayed in the
Operator list.
Choose the Operator ID to be used by scrolling
through the list and pressing the OK key on the
desired choice. The instrument will return to the
System menu.
To modify or delete an existing Operator ID,
highlight the ID and select Edit. Choose either
Edit to modify the existing entry or Delete to
remove it from the list.
8
5.3 Sample ID
The Pooltest 25 offers the option to create up to 24
unique alphanumeric Sample IDs. Sample IDs are
added to the result data automatically but
deleting IDs does not affect the result log.
To create a new Sample ID, select Sample ID
and use the up/down keys to select a blank field.
Select New and press OK.
Alphanumeric characters are entered/edited using
the 0-9 keys or the up/down keys. Press and hold
the 1 key to toggle between upper and lower
case characters.
After entering a character, the cursor automatically
moves to the next position if no key is pressed.
Alternatively press the right key.
Up to 10 characters can be added for Sample IDs,
including spaces.
To edit characters use the left/right keys to select
the desired character. Press and hold the left key
to delete the character or change the character
using the entry mode.
Advertisement
Table of Contents
