Table of Contents
Advertisement
5.0 System Mode
Personalise your Pooltest 25 and access the
data log via the System Mode.
Scroll up or down using the appropriate keys
to see all available options. The options and
available settings are as follows:
5.1 Log
The Pooltest 25 has an internal data log for up
to 1000 data points. The data is stored
automatically upon completion of the test and
automatically overwrites the oldest result when
the memory is full. The data log is unaffected by
power on/off.
Each data point consists of the following
information and is stored in a comma-separated
values (CSV) format:
Selecting Log offers two choices:
View - to view individual data points use the
up/down keys. Data is stored in chronological order
with the most recent result shown by default.
Scroll through results using the up/down arrows.
Select Back to return to the previous menu.
Clear - the entire log can be deleted from the
Pooltest 25 if the instrument is not locked (see
System Lock). Selecting Clear produces the
following screen:
Choose Yes to delete all data, No to return to
the previous screen.
Data can be downloaded via either (see Log
Transfer) or USB connection (see USB
Interface).
5.2 Operator ID
The Pooltest 25 offers the option to create up to 12
unique alphanumeric Operator IDs. Operator IDs are
added to the result data automatically but deleting
IDs does not affect the result log.
To create a new Operator ID, select Operator ID
and use the up/down keys to select a blank field.
Select New and press OK.
Alphanumeric characters are entered/edited using
the 0-9 keys or the up/down keys. Press and hold
the 1 key to toggle between upper case, lower
case and numeric characters.
System Mode
7
5
Advertisement
Table of Contents
