Advertisement
eAN3810A
Deployment Guide
Table 1-2 Startup modes
Startup Mode
CME client
mode
U2000 client
mode
Procedure
1.
Issue 01 (2017-04-30)
Description
This mode applies when the CME functions are used. In this mode,
only the CME functions are started, and the U2000 functions are not
started, such as fault management, topology management, and
performance management.
In this mode, the CME functions can be started using either of the
following methods:
Start CME functions on the U2000 client in application
Start the CME client
This mode applies when both the CME and U2000 functions are used.
In this mode, both the CME functions and U2000 functions (such as
fault management, topology management, and performance
management) are started. For detailed operations, see
functions on the U2000 client in traditional
Start the CME.
−
Start CME functions on the U2000 client in application mode.
On the Windows desktop, choose Start > All Programs > iManager U2000 MBB
Client.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 eAN3810A Deployment Guide
directly.
mode.
mode.
Start CME
7
Advertisement
