Advertisement
eAN3810A
Deployment Guide
8.
Ensure that the path for configuration files in the USBConf.xml file is consistent with the save path in
the MicroSD card.
9.
Do not change the directory structure in the folder when files are being copied. Otherwise,
deployments or upgrades using a MicroSD card will fail.
f software needs to be upgraded but no software package is contained in the MicroSD card, manually
copy the software package to the fixed directory. For details about the save path for the software
package in the MicroSD card.
10. (Optional) If the USBConf.xml file has not been saved in the NodeB eNodeB , or
Issue 01 (2017-04-30)
−
The system applies the selected encryption protection to files, and applies integrity
protection to all files in the file list area based on the specified integrity algorithm.
−
Sizes of files remain the same after encryption is completed because the system
uses a symmetrical encryption algorithm.
Click OK, when a dialog box is displayed indicating the completion of integrity and
encryption protection.
Integrity protection codes of files are displayed in the MAC address list. The
USBConf.xml file generated by the tool is saved in the path specified in 4.1.
Delete existing files on the MicroSD card. Copy the folder containing the files that have
been protected by using the tool from the computer to the MicroSD card. All the files in
the folder must be copied.
Figure 1-16 Copying the USBConf.xml file
MBTS folder when you perform step 4.1 you must copy the USBConf.xml file to the
fixed path in the MicroSD card, in accordance with the following table. Otherwise, the
files in the MicroSD card cannot be downloaded.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
SeeFigure 1-16
1 eAN3810A Deployment Guide
36
Advertisement
