Advertisement
eAN3810A
Deployment Guide
Option
the software and
updating configuration
files
Directory for updating
configuration files only
4.
Option
One USB for One Site
Issue 01 (2017-04-30)
The USB making and protection tool automatically parses and displays the information
of the target NE on the USB Making and Protection Tool window. Select the NE that
requires an SD card. After all NE information is correctly specified, select a deployment
mode in the USB Flash Drive Type area.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Information to Set
decompressed from a specified version software package
Cold patch path: optional, save path of the files
decompressed from a specified cold patch package
Hot patch path: optional, save path of the files
decompressed from a specified hot patch package
Based on different version combinations of NEs to be deployed
in the deployment list, specify Software path, Cold patch
path, or Hot patch path. Then, click Add to add the path to
the software version list. Based on the target version
information in the deployment list, the USB making and
protection tool copies different versions to the corresponding
directories of the NEs to be deployed. If an unnecessary
software version is added, you can click Delete to remove this
software version.
NOTE
The software version of the original and target versions must be
eAN3810A V100R001C00SPC200 and later.
Auto deployment list: mandatory. Select the deployment list
exported from the CME.
The exported deployment list is saved in export path/ADList/
by default. Engineers must select the only .xml file in this
directory.
Do not copy .csp file: It is good practice to deselect this
option. In this case, all files and integrity protection
information except the .csp files are saved in the directories and
you can send them through emails. Then, copy the SD card
directories to the SD card containing the intact software
package. Use this SD card to upgrade the software and update
configuration files.
Auto deployment list: mandatory. Select the deployment list
exported from the CME. The exported deployment list is
saved in export path/ADList/ by default. Engineers must select
the only .xml file in this directory.
NE Type and Service Mode: mandatory. Select LTE based on
the working mode of the NE.
Do not copy .csp file: selected by default.
Description
Save the information about each NE to an
independent SD card.
1 eAN3810A Deployment Guide
15
Advertisement
