Advertisement
eAN3810A
Deployment Guide
5.
Disabling the SD Card Port
Prerequisites
Procedure
Step 1 Run the SET MICROSDCARDPORT command with the Port Switch parameter set to Off.
----End
Verifying Services
This section describes how to verify that UEs can attach to the eAN3810A and perform ping
services.
Prerequisites
Cells are activated.
UEs have been defined on the core network.
Procedure
1.
1.2.5 FAQ
This section describes the graphical user interfaces (GUIs) involved in deployment and
troubleshooting methods for common problems.
How Do I Set the U2000 Client Display Style?
The U2000 client has two display styles: application style and traditional style. You can set
the display style as required.
Context
Switching between styles changes the overall usability of the U2000 client and the way the
U2000 client is launched. The U2000 client supports two display styles:
Table
Issue 01 (2017-04-30)
Check the alarms one by one to determine whether they are related to the new
eAN3810A deployment. If related, handle the alarms. For details about how to handle
the alarms, see the alarm reference.
The transmission network is ready.
The eAN3710A is connected to the U2000 or Web LMT.
Check whether UEs can successfully attach to the eAN3810A and perform ping services.
Application style
Traditional style
1-6describes the differences between the two styles.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 eAN3810A Deployment Guide
27
Advertisement
