Advertisement
eAN3810A
Deployment Guide
2.
Configuring Data on GUIs
This section describes how to initially configure a single base station on GUIs using a default
or user-defined template.
?.1.Creating Base Stations
This section describes how to create base stations. To create base stations, you need to start
the wizard provided by the CME for creating base stations, set basic base station data, and
select a required template. After the base stations are created, configure global data and
maintenance modes for the base stations in the general configuration window of the CME.
Procedure
1.
2.
Issue 01 (2017-04-30)
After logging in to the U2000 client, choose CME on the menu bar of the U2000
main window and then choose a submenu item to start the related CME function.
Create a planned data area.
a.
On the menu bar, choose Area Management > Planned Area > Create Planned
Area (CME client mode) or CME > Planned Area > Create Planned Area
(U2000 client mode). A dialog box is displayed for you to create a planned data
area.
b.
Set related information.
i.
Enter the name of the planned data area.
ii.
Select a user group.
c.
Click OK. The CME starts to create the planned data area.
After successfully creating the planned data area, the CME automatically opens it.
If a multimode base station capable of working in LTE mode is to be created, add the controller
associated to the base station to the planned area when you create a planned area.
For details about how to create a planned data area, press F1 to obtain the online help.
On the menu bar of the planned data area, choose CME > OneAir Application >
Create Base Station (U2000 client mode) or OneAir Application > Create Base
Station (CME client mode). A dialog box is displayed for you to create base stations.
Set site information.
a.
Select eAN3810A from the Product type drop-down list.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 eAN3810A Deployment Guide
9
Advertisement
