Periodic Replacement Of Defined Life Parts; Defined Life Parts List - Komatsu PC290LC-11 Operation & Maintenance Manual

Hydraulic excavator
Hide thumbs Also See for PC290LC-11:
Table of Contents

Advertisement

PERIODIC REPLACEMENT OF DEFINED LIFE PARTS

PERIODIC REPLACEMENT OF DEFINED LIFE PARTS
For using the machine safely for an extended period of time, you must periodically replace the safety and fire
prevention-related parts listed in the table of defined life parts.
Material quality of these parts can change as time passes and they are likely to wear out or deteriorate. Howev-
er, it is difficult to determine the extent of wear or deterioration at the time of periodic maintenance. Hence, it is
required to replace them with new ones regardless of their condition after a certain period of usage. This is im-
portant to ensure that these parts maintain their full performance at all times.
Furthermore, should anything abnormal be found on any of these parts, replace it with a new one even if the
periodic replacement time for the part has not yet arrived.
If any of the hose clamps show deterioration like deformation or cracking, replace the clamps at the same time
as the hoses.
Also perform the following checks with hydraulic hoses which need not to be replaced periodically. Retighten all
loose hoses and replace defective hoses, as required.
When replacing hoses, always replace O-rings, gaskets, and other such parts at the same time.
Have your Komatsu distributor replace the defined life parts.

DEFINED LIFE PARTS LIST

No.
1
Fuel system
2
Engine lubrication system
3
Work equipment hydraulic
system
4
Others
7-2
Parts for periodic replacement
Fuel hose
Turbocharger lubrication hose
Engine oil filter hose
Main pump delivery hose
Pump delivery hose
Pump branch hose
Main pump LS hose
Swing line hose
Main suction hose
External work equipment hose
Boom foot connection hose
Boom cylinder hose
Arm connection hose
Arm cylinder hose
Bucket cylinder hose
Line hose for additional attachment
PPC accumulator
Accumulator for additional attachment
Seat belt
REPLACEMENT PARTS
Replacement interval
Every 2 years or 4000 hours,
whichever comes sooner
Every 3 years from start of us-
age or 5 years after manufac-
turing of seat belt, whichever
comes sooner.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pc290nlc-11

Table of Contents