Handle Bucket With Hook; Precautions For Operation - Komatsu PC290LC-11 Operation & Maintenance Manual

Hydraulic excavator

Hide thumbs Also See for PC290LC-11:

Table of Contents

ATTACHMENTS AND OPTIONS

HANDLE BUCKET WITH HOOK

When using the bucket with hook, check that there is no damage to the hook, stopper, or hook mount. If there is

any problem, ask your Komatsu distributor.

PRECAUTIONS FOR LIFTING OPERATIONS

If lifted load largely swings, it is dangerous. During lifting operations, reduce the engine speed and perform the

operation in L mode.

The wire or sling may come off the hook, depending on the

working posture. Pay sufficient attention to the hook angle so

that the sling does not come off.

Never drive the machine while lifting a load.

If the bucket with hook is turned 180 ° and used for operations,

it will hit the arm during the bucket DUMP operation. Be careful

when using it.

If you are planning to newly install a hook, ask your Komatsu

distributor for installation.

Table of Contents