Komatsu PC290LC-11 Operation & Maintenance Manual page 319

OPERATION
Completely remove the covering tapes (b) for mounting
holes of stoppers and striker.
2.
Installation of stoppers
Tighten adaptor (4) to install stoppers (1) and (2).
Tightening torque for adaptor (4) : 59 to 98 Nm {6.0 to 10.0
kgm}
3.
Installation of striker
1)
Tighten nuts (8) (2 places) to install striker (3).
2)
Install cap (7) to inside the door picking protrusion (a) of cap (7) with fingers.
TRANSPORTATION
3-247