Safety Labels - Komatsu PC290LC-11 Operation & Maintenance Manual

SAFETY LABELS

FOREWORD
SAFETY LABELS
Safety labels are affixed to the machine to inform the operator or maintenance worker on the spot when carrying
out operation or maintenance of the machine that may involve hazard.
This machine uses "Safety labels using pictograms" to indicate safety procedures.
SAFETY LABELS USING PICTOGRAMS
Safety pictograms use a picture to express a level of hazardous
condition equivalent to the signal word. These safety picto-
grams use pictures in order to let the operator or maintenance
worker understand the level and type of hazardous condition at
all times. Safety pictograms show the type of hazardous condi-
tion at the top or left side and the method of avoiding the haz-
ardous condition at the bottom or right side. In addition, the
type of hazardous condition is displayed inside a triangle and
the method of avoiding the hazardous condition is shown inside
a circle.
Komatsu cannot predict every circumstance that might involve
a potential hazard in operation and maintenance. Therefore,
the safety messages in this manual and on the machine may
not include all possible safety precautions.
If any procedures or actions not specifically recommended or
allowed in this manual are used, it is your responsibility to take
the necessary steps to ensure safety
In no event should you engage in prohibited uses or actions de-
scribed in this manual.
The explanations, values, and illustrations in this manual were prepared based on the latest information availa-
ble at that time. Continuing improvements in the design of this machine can lead to changes in detail which may
not be reflected in this manual
Consult Komatsu or your Komatsu distributor for the latest available information of your machine or for ques-
tions regarding information in this manual.
The numbers in the illustrations correspond to the numbers in ( ) in the text.
1-4