Komatsu PC290LC-11 Operation & Maintenance Manual page 144

EXPLANATION OF COMPONENTS
F5: Returns the screen to the Attachment Setting screen without changing the name.
F6: Enters the change and returns to the Attachment Setting screen.
It is not possible to change the name for "No Attachment" setting.
Changing "2-Way Attachment Oil Flow Rate Setting"
1.
Select an attachment setting to change its oil flow rate on
the "Attachment Setting" screen, then press switch F2.
2.
The "2-Way Attachment Oil Flow Rate Setting" screen is
displayed.
On the "2-Way Attachment Oil Flow Rate Setting" screen,
you can perform the following operations with switches F3
to F6.
F3: Decreases the flow by 1 level.
F4: Increases the flow by 1 level.
F5: Returns to the "Attachment Setting" screen without
changing the oil flow rate.
F6: Enters the oil flow setting and returns to the "Attach-
ment Setting" screen.
(X): Present oil flow setting
(Y): Min. adjusted oil flow
(Z): Max. adjusted oil flow
It is not possible to change the oil flow for "No Attachment" setting.
AUTO IDLE STOP TIMER SETTING
The auto idle stop function stops the engine automatically when the engine is operated continuously at idle with
the lock lever in LOCK position for a set time.
The auto idle stop function operates only when the following conditions are satisfied.
• The engine is running normally.
• The lock lever is in LOCK position.
• The engine coolant and hydraulic oil are not overheating.
• The engine is not in warm-up operation.
• The machine is not in L mode.
You can set the time to operate the auto idle stop function on the auto idle stop timer setting screen.
3-72
OPERATION