Komatsu PC290LC-11 Operation & Maintenance Manual page 236

MACHINE OPERATIONS AND CONTROLS
REMARK
• Shim (6) may be inserted in the cover mounting bolts
to adjust the clearance in the rim of the cover. When
removing cover (1), record the places and quantities
of the shims. When installing the cover, insert the
shims according to the record.
• Take care of shim (6), since it comes off together with
cover (1).
4.
Loosen camera mounting bolts (5) (3 places) and adjust
camera mounting angle (A) so that corner (D) of mounting
bracket (C) is aligned with horizontal line (E).
5.
After adjusting, tighten bolts (5).
Tightening torque: 11.8 to 14.7 Nm {1.2 to 1.5 kgm}
REMARK
A part of the machine is shown on the monitor screen.
3-164
OPERATION