Advertisement
MAINTENANCE
GREASING THE SHEAVE
Locate the grease zerk on the ends of the sheave
pin. Inject Lithium-Complex Extreme Pressure
grease conforming to NLGI2-ISO 320 specifications
into the pin until it pr otrudes from the ends. This
should be greased daily or for every 8 hours of
service.
TIGHTENING BLADE BOLTS AND DISK BOLTS
After every 8 h ours of op eration or daily, the knife
bolts and disk bolts should be tightened as follows:
Knife Mounting Bolts (2 or 3 ea.) torque to 800 oiled
ft. lbs.
Disk Mounting Bolts (6 ea.) torque to 204 dry or 180
oiled ft./lbs.
SIDE ROTARY
Maintenance Section 4-14
© 2014 Alamo Group Inc.
Advertisement
