Covers; Cover Of The X-Ray Unit; Horizontal Carriage Cover; Cable Module Cover - Siemens ARCADIS Orbic Installation And Startup

Actions
3-

Covers

2Actions
•
Proceed as follows after the ARCADIS Orbic 3D has been moved to the respective
room and the brake has been enabled.

Cover of the X-ray unit

•
Remove the cover and reattach it after installing the 3D option.

Horizontal carriage cover

•
Remove the cover and connector M3.X1.
•
Reattach the cover after installing the 3D option.

Cable module cover

•
Remove the cover and dispose of it properly, because this cover will no longer be re-
quired.
•
Attach the new cover after installing the 3D option.
Siemens AG
Medical Solutions
SPR2-320.814.02.01.02
01.05
Page 13 of 46
CS SD 24
13
0
0
0
0
ARCADIS Orbic