Siemens ARCADIS Orbic Installation And Startup page 40

40
Fig. 40: Connectors_cable set for orbital drive
Fig. 41: Plug in encoder
•
Remove the cover from the encoder
•
(Fig. 42 / p.
•
Connect the encoder plug of the encoder cable to the encoder plug under the cover.
•
Connect the angulation plug of the cable of the angulation part to the X4 plug of the or-
bital drive cable set.
•
Connect the limit switch plug of the limit switch cable to the limit switch plug of the orbit-
al drive.
ARCADIS Orbic
3D Reconstruction Upgrade Part 2
41) shows the plugs from the limit switch cable of the orbital drive.
SPR2-320.814.02.01.02
01.05
(Fig. 43 / p. 41).
Page 40 of 46
CS SD 24
Siemens AG
Medical Solutions