MOTO GUZZI CALIFORNIA EV 1997-2000 Workshop Manual page 242

A
B
C
D
E
F
G
H
I
L
M
N
O
P
34
Secondary shaft reassembly on the housing
Follow the procedure below to reassemble gears and
sleeves on the very shaft.
On the shaft, housing side, insert the following:
• The bushing for the 2 -speed gear on the shaft; make
nd
sure that the head of the bushing faces the cover.
• The roller bearing cage for the 2
bushing.
• The 2 -speed gear on the roller bearing cage, making
nd
sure that the front engaging notches face the cover.
• The washer between the 2
gear.
• The 3 -speed gear on the roller bearing cage, making
rd
sure that the front engaging notches face the housing
side.
• The bushing for 3 -speed gear on the shaft with head
rd
facing the mobile sleeve.
• The fixed sleeve, making sure that the lowered internal
part is assembled facing the 3
• The inner bearing race, 4
code 14928600, see chapter 5 section B.
• The mobile sleeve to engage the 3
making sure that the lowered part faces the 3
gear.
• The roller bearing cage on the bushing.
• The 4 -speed gear on the shaft, making sure that the
th
front engaging notches face the mobile sleeve.
On the shaft, cover side, insert the following:
• 1 and 2 gear sleeve on the shaft.
st nd
• The bushing for 1 -speed gear with head towards the
st
2 -speed gear.
nd
• The roller bearing cage for 1
bushing.
• The 1 -speed gear on the roller bearing cage.
st
• The seal ring within the groove on the shaft.
• The 5 -speed gear making sure that the lowered part
th
is assembled on the seal ring.
G
EARBOX
-speed gear on the
nd
-speed and the 3 -speed
nd rd
-speed gear.
rd
-speed gear side, with tool
th
and 4 gear
rd th
-speed
rd
-speed gear on the
st