MOTO GUZZI CALIFORNIA EV 1997-2000 Workshop Manual page 184

A
B
C
L
D
E
M
F
G
H
N
I
L
M
N
O
P
6
• Remove front bumper, if fitted, as described in chapter
6 section H; if the bumper has not been fitted, unscrew
the 2 screws "I" to free from the front the 2 frame
sections from the chassis;
• Unscrew nut "L" and remove front nut "M" fixing the
engine to the chassis;
I
Remove rear footrests as described in chapter 3
•
section H;
• Unscrew the 4 screws "N" (2 for each frame section)
O
in order to remove the 2 footrest supports "O", and at
the same time release the frame sections from the
chassis from the rear end;
• Lift the rear end and remove the chassis together with
the fork and the front wheel;
• once the chassis has been removed, disassemble the
frame section arms from the engine – gearbox
assembly;
• Detach the engine assembly form the gearbox
assembly once the 6 nuts "P" have been unscrewed.
Reassembly of engine - gearbox assembly:
• Carry out the removal procedures in reverse order to
reassemble the engine – gearbox assembly.
P
E
NGINE