Table of Contents
Advertisement
Easy 3D Mode (Option)
3D Type
Easy 3D Mode
Designed for rendering B Mode images,
e.g., fetal face scans.
Acquiring a 3D Scan
NOTE:
NOTE:
NOTE:
–
Versana Essential
5759238-100 English Rev. 2
Table 2-5:
Description
1. Optimize the B-Mode image. Ensure even gel coverage.
2. Press the User Defined key configured for 3D functionality.
Two screens appear.
Before scanning, set appropriate values for Acq Mode, Scan
Plane and the Scan distance.
3. To start acquiring the image, press L (the left split screen
key).
4. To perform a parallel scan, scan evenly. To perform a sweep
(fan) scan, rock the probe once. Note the distance of the
scan.
5. The 3D volume of interest (VOI) is dynamically assembled
on the right side of the screen.
If the image stops before you're done scanning, start
acquiring the 3D volume of interest again.
6. To complete the 3D scan, press R (the right split screen
key).
You can also press Freeze, but then you need to also press
the 3D key to obtain the final rendering images.
User Guide
3D Package Options
Sensor/No
Sensor
No sensor
Optimizing the Image
Available Tabs
3D Acquisition, Easy
Mode, Movie
2-11
Advertisement
Table of Contents
