Cable Handling
Activating/Deactivating the Probe
CAUTION
Disconnecting the Probe
–
Versana Essential
5759238-100 English Rev. 2
Take the following precautions with probe cables:
•
Keep free from wheels.
•
Do not bend the cable acutely.
•
Avoid crossing cables between probes.
To activate the probe, select the appropriate probe from the
probe indicators in Probe/Preset screen.
To deactivate the probe, select another probe or press Freeze
key to enter into freeze mode.
The probe's default settings for the mode and selected exam are
used automatically.
Make sure that the probe and application names displayed on
the screen correspond to the actual probe and application
selection.
Probes can be disconnected at any time. However, the probe
should not be active when disconnecting the probe.
1. Deactivate the probe.
2. Slide the connector lock to the left position to unlock the
probe.
3. Pull the probe connector straight out of the probe port
carefully.
4. Ensure the cable is free.
5. Be sure that the probe head is clean before placing the
probe in its storage box.
User Guide
Probes
1-43
Need help?
Do you have a question about the Versana Essential and is the answer not in the manual?