Scanning Film; Using The Film Holders - Epson Perfection 4870 Quick Manual

Epson perfection 4870
Hide thumbs Also See for Perfection 4870:
Table of Contents

Advertisement

Available languages

Available languages

8. Click the
After your photo is scanned, you can make more adjustments in Photoshop
Elements or save your file.

Scanning Film

Your scanner includes four film holders. Each film holder allows you to scan
multiple images at once. You can scan up to twenty-four 35mm filmstrip images,
eight 35mm slides, three 120/220 (6
images.

Using the Film Holders

To scan film, you'll need to remove the reflective document mat and place the film
in a holder.
1. Make sure the transparency unit cable is connected to the option interface
connector on the back of the scanner. (If it is not connected, turn off the
scanner, connect the transparency unit cable, then turn the scanner back on.)
2. Lift the scanner lid all the way up and pull
the reflective document mat up and off of
the scanner lid, as shown.
6
Scanning Film
button.
Scan
×
12 cm) film images, or two 4
×
5 film

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Perfection 4870 series

Table of Contents