Scanning Film - Epson Perfection 2400 Start Here Manual

Smart Panel
1
To select the Color Restoration setting, open Smart Panel and select
Reprint Photo. You see the screen below.
2
Click the Color Restoration icon.
EPSON Scan
Color restoration is available in Home and Professional modes.
1
To select Color Restoration,
start EPSON Scan.
You see a screen
similar to this.
2
Click the Preview button at the bottom of the screen.
3
Select the Color Restoration checkbox. (If you're using Professional
Mode, you may need to scroll to the bottom of the screen.)

Scanning Film

The scanner cover has a built-in film transparancy unit. To scan film or negative
strips, slides, or transparencies, you need to remove the document mat from the
scanner cover and insert the film in a holder.
Follow these steps to scan 35 mm film or slides:
1 Make sure the cable for the transparency unit is connected to the scanner
(see section 3). If you need to connect the cable, first disconnect the
scanner from the electrical outlet. After you have connected the cable,
plug the scanner back into the outlet.
2 Open the scanner cover. Pull the handle for the document mat up slightly
until the handle is free of the cover, then pull the document mat forward
and out.
3 Locate the film holder that came with your scanner. Slide a strip of 35 mm
film into the film strip holder, with the film's shiny side side facing down.
Select Color
Restoration
Click Color
Restoration
Click here to
scan and print
continue