Matsui M50TW12E Instruction Manual page 17

INSTALLATION
9. Unscrew and remove the bottom hinge
pin, turn the bracket over and replace it.
10. Refit the bracket fitting the bottom
hinge pin. Replace both adjustable feet.
Transfer the lower door to the property
position.
11. Make the middle hinge reverse the
direction 180°, then transfer it to the
left property position. Make the middle
hinge pin in the upper hole of the lower
door, then tight the bolts.
Ensure the freezer door is aligned
horizontally and vertically, so that the
seals are closed on all sides before
finally tightening the hinge.
Unscrew
Screw
Screw
GB
17