Moog Videolarm OH206T Product Instructions

Specifi cation
Number
INSTRUCTIONS 5178
MODEL: Indoor Ceiling Housings
OH201TL/CL; OH161TL/CL; OH121TL/CL,
OH206T/C, OH166T/C, OH126T/C
STANDARD IN STAL LA TION PROCEDURE
INCLUDES MODELS: OH201TL/CL; OH161TL/CL;
OH121TL/CL; OH206T/C, OH166T/C,
OH126T/C
!
Use Only Class 2 Power Supply
MODEL OH201TL, CL/OH161TL, CL/OH121TL, CL
Housing Contents:
(1) Tinted /clear dome
(2) Support channels
(1) Black opaque liner
(1) FM2 camera bracket assembly
(1) Black dust cover
1. Remove contents from the box.
2. Remove the ceiling tile in the desired location.
3. Place the dome so that it rests on the ceiling grid.
NOTE: Be sure that the grid is adequately sup port ed.)
4. Place the black opaque liner in the dome and rotate it to the
desired viewing postion.
5. Only one viewing slot is provided in the liner. If more than one
camera is being mount ed, additional holes can be cut in the
liner using a hole saw or utility knife. Be sure to orient each
viewing hole correctly.
6. Assemble the FM2 camera bracket. Align the long slots of the
bracket arms. Using a carriage bolt, 5/16" washer, 1/4"
washer, lockwasher and hex nut, attach the bracket arms
together loosely (Figure 1, next page).
7. Assemble the Support Channels. Slide the smaller channel
through the slot on the larger one (Figure 2, next page). BE
CAREFUL WHEN HANDLING SUPPORT CHANNELS,
EDGES MAY BE SHARP.
8. Use the 1/4 x 20 bolt supplied to connect the FM2 to the cen-
ter hole on the support channel assembly.
NOTE: For added fl exibility, the camera can be mounted on
either the short or long side of the bracket arm.
9. Securing tabs are provided to hold the bracket in the liner.
Bend the corresponding tab with a screwdriver (Figure 2, next
page).
10. Connect the camera to the FM2 bracket and place the
as sem bly in the dome so that the edges of the bracket will rest
on the fl ange of the dome (Figure 3, next page).
11. Tighten all connections and complete wiring of the camera.
12. Place the black dust cover over the top of the dome, so that
the dust cover is sitting on the support channels.
2525 Park Central Blvd. • Decatur, Ga 30035 • (770) 987-7550 • 800-554-1124 U.S. & Canada • Fax 800-826-0366 • www.videolarm.com
Cat a log
Section
1b
REVISION DATE: August 7, 2003
PRODUCT INSTRUCTIONS
MODEL OH206T/OH166T/OH126T
Housing Contents:
(1) Tinted /clear dome
(2) Support channels
(1) FM2 camera bracket assembly
1. Remove contents from the box.
2. Remove the ceiling tile in the desired location.
3. Place the dome so that it rests on the ceiling grid.
NOTE: Be sure that the grid is adequately sup port ed.)
4. Assemble the FM2 camera bracket. Align the long slots of the
bracket arms. Using a carriage bolt, 5/16" washer, 1/4"
washer, lockwasher and hex nut, attach the bracket arms
together loosely (Figure 1, next page).
5. Assemble the Support Channels. Slide the smaller channel
through the slot on the larger one (Figure 2, next page). BE
CAREFUL WHEN HANDLING SUPPORT CHANNELS,
EDGES MAY BE SHARP.
6. Use the 1/4 x 20 bolt supplied to connect the FM2 to the cen-
ter hole on the support channel assembly.
NOTE: For added fl exibility, the camera can be mounted on
either the short or long side of the bracket arm.
7. Securing tabs are provided to hold the bracket in the dome.
Bend the corresponding tab with a screwdriver (Figure 2).
8. Connect the camera to the FM2 bracket and place the
as sem bly in the dome so that the edges of the bracket will rest
on the fl ange of the dome (Figure 3, next page).
9. Tighten all connections and complete wiring of the camera.
MODEL OH202D/162D/122D
Contents include:
one black acrylic dome
1. Remove contents from the box.
2. Remove the ceiling tile in the desired location.
3. Place the dome so that it rests on the ceiling grid.
DOME CARE
Please use the following precautions to maintain the dome's
perfect optical properties:
• Always handle the dome from the outside of its circular fl ange.
• If dust or other contaminants ac cu mu late on the dome, they
should be removed with clean air pressure.
• If com pressed air is not available the dome can be cleaned
with any non-abrasive cleaning cloth, and a cleaning agent
that is safe for use on acrylic.