Unpacking The Transparency Unit; Removing The Shipping Screw - Epson Expression 800 Setup Manual

Unpacking the Transparency Unit

Make sure that all of the following items are included in the transparency unit box. If
any items are missing or damaged, contact your EPSON dealer. Keep all the packing
materials so you can use them for storage when you are not scanning transparencies.
transparency unit
reflective document mat

Removing the Shipping Screw

To prevent damage during shipping, a shipping screw is attached to the transparency
unit to secure its lamp assembly. You must remove this screw before using the
transparency unit.
1. Turn the transparency unit so the glass side faces up.
2. Use a Phillips head (cross
head) screwdriver to remove
the shipping screw from the
hole labeled
CLAMP
shown at right.
3. Install the screw in the
storage hole labeled
.
STOCK
, as
film holders
screws
45