Power On Your System; Install The Scanner Software; If You're Running Windows 98 - Epson Perfection 636U User Manual

Epson perfection 636u: user guide

Hide thumbs Also See for Perfection 636U:

Table of Contents

Power On Your System

Always turn your scanner on before you turn on the computer. Otherwise, the

computer may not recognize your EPSON scanner when you install your software.

The scanner software comes on two CD-ROMs: one for Windows 98 and one for the

iMac. Check the CD-ROM label to make sure you have the correct CD-ROM for

your operating system.

You may be asked to insert your Windows 98 operating system CD-ROM during the

scanner installation. Please have your Windows CD-ROM handy, in case it is needed.

1. Turn on your scanner first; then turn

on your computer. A screen appears

saying that your system has detected

new hardware. Then the Add New

Hardware Wizard screen appears.

2. Insert the scanner software

CD-ROM in the CD-ROM drive,

then click

The operate light on the top of the scanner blinks as the

scanner initializes.

Whenever you turn off the scanner, wait at least 10 seconds

before turning it back on. Rapidly turning the scanner on and off

can damage the scanner.

Table of Contents