Connecting Or Verifying Power Cables; Connecting Or Verifying The Gray Power Cables For Pdu A - EMC VNX Series Installation Manual

Power up

Connecting or verifying power cables

Connecting or verifying the gray power cables for PDU A

54 EMC VNX Series VNX5600 Unified Installation Guide
Before you begin
Ensure that the cabinet circuit breakers are in the On position, all necessary PDU
switches are switched On, and the power is connected.
On the rear of the cabinet, the power cables connected to PDU A are colored gray and the
power cables for connecting to PDU B are colored black. While the cabling order does not
matter so long as all the cables are connected properly, they have been separated
according to PDU (A or B).
As soon as you connect the power cables, the component starts powering up
automatically. This is normal. Refer to
LED status.
Verify or connect the power cables as shown in
the power cables are locked in place.
Procedure
1. From SP A to PDU A. See cable 1 in
Verifying system status on page 57
Figure 40 on page
Figure 40 on page 55.
for correct
55. Ensure that all