Electrical Connections - CAME BX708AGS Installation Manual

ELECTRICAL CONNECTIONS

⚠ Connect all wires and cables in compliance with the law.
Before connecting all the wires, set up the cables by using cable glands on the control board brace, as shown in the figure.
⚠ The electrical cables must not touch any heated parts such as the motor, transformer, and so on.
Control-board brace cable glands
FACTORY WIRING
120/230V (AC) gear motor with
Encoder
Condenser
Mechanical limit switch
Opening limit-switch
micro-switch
RED
BLACK
Closing limit-switch
micro-switch
ORANGE
WHITE
RED