Control Board - CAME BX708AGS Installation Manual

CONTROL BOARD

⚠ Caution! Before doing any work on the control board, cut off the mains power supply, and disconnect any batteries.
The functions available on the input and output contacts, the time adjustments and user management are all set and viewable on the segmented graphic
display.
The operator is designed to be fitted on the left. If installing on the right, invert the gearmotor's U-V and the limit-switches FA-FC cables.
⚠
Fuses
- Line
- Card
- Accessories
DESCRIPTION OF PARTS
1. Power supply terminals
2. Gear motor terminals
3. Transformer terminals
4. Control-board fuse
5. Terminals for control and safety devices
6. Fuse accessories
7. Terminals for the RGP1 module
8. Encoder terminals
9. Keypad selector terminal
10. Terminals for limit-switch micro-switches
11. Antenna terminal
12. AF card slot
13. Terminals for transponder selector
14. Terminals for paired of CRP connection
15. Connector for the R700/R800/R900 card
16. Connector for the RIO-CONN card
17. RSE card slot
18. Programming buttons
19. Memory roll card slot
20. Display
21. Power supply on warning LED
22. Line fuse
ZBX7N
5 A-F (230 V AC)
8 A-F (120 V AC)
630 mA-F
1 A-F