Dismantling And Disposal - CAME BX708AGS Installation Manual

WHAT TO DO IF ...
ISSUES
It neither opens nor
closes
The gate opens but
does not close
PAIRED OPERATION
Electrical wiring
- Fit the RSE card into the connector on the control panel of both operators;
Connect the two panels by using a CAT 5 (max 1,000 m type cable to terminals A-A / B-B / GND-GND, see paragraph called PAIRED OPERATION;
Connect all of the control and safety devices on the MASTER operator's control panel.
Saving users
Execute the procedure, to add a user with an associated command, on the MASTER panel.
Programming
Start by performing the following settings only on the MASTER control panel:
- select 1 (paired mode) from the F49 function and press ENTER to confi rm;
- select the opening direction from the F54 function and press ENTER to confi rm;
- select ON from the F52 function and press ENTER to confi rm the transferring of the parameters to paired mode;
- select ON from function A3 and press ENTER to perform the gate travel
The programming keys on the SLAVE control panel are disabled.
Operating modes

Either
Both leaves open.
PARTIAL/PEDESTRIAN OPENING command. Only the MASTER operator's leaf opens.
For the types of command that can be selected and paired to users, see the ENTERING USERS WITH ASSOCIATED COMMANDS.

DISMANTLING AND DISPOSAL

☞ CAME CANCELLI AUTOMATICI S.p.A. applies a certified Environmental Management System at its premises, which is compliant with the UNI EN
ISO 14001 standard to ensure the environment is safeguarded.
Please continue safeguarding the environment. At CAME we consider it one of the fundamentals of our operating and market strategies. Simply
follow these brief disposal guidelines:
DISPOSING OF THE PACKAGING
The packaging materials (cardboard, plastic, and so on) should be disposed of as solid household waste, and simply separated from other waste for
recycling.
Always make sure you comply with local laws before dismantling and disposing of the product.
DISPOSE OF RESPONSIBLY!
DISMANTLING AND DISPOSAL
Our products are made of various materials. Most of these (aluminum, plastic, iron, electrical cables) are classified as solid household waste. They
can be recycled by separating them before dumping at authorized city plants.
Whereas other components (control boards, batteries, transmitters, and so on) may contain hazardous pollutants.
These must therefore be disposed of by authorized, certified professional services.
Before disposing, it is always advisable to check with the specific laws that apply in your area.
DISPOSE OF RESPONSIBLY!
POSSIBLE CAUSES
• Power supply is missing
• The gear motor is stuck
• The transmitter emits a weak signal or no signal
• Control buttons or selectors stuck
• The photocells are working
STEP-STEP
MASTER
MASTER
POSSIBLE FIXES
• Check main power supply
• Lock the gearmotor
• Replace the batteries
• Check the state of all devices
• Check that there are no obstructions
in the photocells' area of operation
calibration.
or ONLY
SLAVE
SLAVE
OPEN command.