Control Devices - CAME BX708AGS Installation Manual

CONTROL DEVICES

WARNING! For the system to work properly, before fitting any snap-in card (e.g. the AF R800), you MUST CUT OFF THE MAIN POWER
SUPPLY and remove any batteries.
Keypad selector.
STOP button (NC contact). For stopping the gate while excluding automatic
closing. To resume movement either press the control button or any other
control device.
 Activate the F1 programming function. If the button is no used, leave
this function deactivated.
PARTIAL OPENING function from control device (NO contact)
OPEN-CLOSE-INVERT (step-step) function from control device (NO contact).
Alternatively, from the functions programming you can activate the single
command OPEN-STOP-CLOSE-STOP (sequential).
See functionF7.
Antenna with RG58 cable for remote control.
Connector for the AF (AF43S or AF868) card, for
controlling the gate via a transmitter.
BLACK
RED
Connector for the R700 card (for using the transponder
selector or the card reader) or for the R800 card (for using
the keypad selector).
 To set the type of selector, see functionF14.
Transponder or card reader.