Options (Line Voltages); Instruments Covered By Manual; Specifications - HP 5004A Operating And Service Manual

1-2. This operating and service manual contains information needed to operate, test, and
service the Hewlett-Packard Model 5004A Signature Analyzer. Figure 1-1 shows the 5004A.
SAFETY CONSIDERATIONS
1-4. The 5004A Signature Analyzer i s a Safety Class I instrument.
designed according to international safety standards.
1-5. This operating and service manual contains information, cautions, and warnings which
must be followed by the user to ensuresafe operation and keep the instrument in safe condition.
1-7. Options for the 5004A are the four possible line voltage settings for the instrument. (Any
the line voltage setting.) The four option numbers are the same a s the corresponding line volt-
ages: 100, 120, 220, and 240, (e.g., Option 120 is for 120 Volt line supply). The procedure to
chan g e the line voltage setting i i g i v e n
1-8.

INSTRUMENTS COVERED BY MANUAL

1-9. Attached to the instrument i s a serial number plate. The serial number is in the form:
last five digits are the suffix. The prefix is the same for all identical instruments; it changes only
when a change is made to the instrument. The suffix however, is assigned sequentially and is
different for each instrument. The contents of this manual apply to instruments with the serial
number prefix(es) listed under SERIAL NUMBERS on the title page.
1-10. An instrument manufactured after the printing of this manual may have a serial number
prefix that is not listed on the title page. This unlisted serial number prefix indicates the instru-
ment is different from those described in this manual. The manual for this newer instrument
is accompanied by a yellow Manual Changes supplement. This supplement contains "change
information" that explains how to adapt the manual to the newer instrument.
errors in the manual. To keep this manual a s current and accurate a s possible, Hewlett-Packard
recommends that you periodically request the latest Manual Changes supplement. The supple-
ment for this manual is identified with the manual print date and part number, both of which
appear on the manual title page. Complimentary copies of the supplement are available from
Hewlett-Packard.
1-12. For information concerning a serial number prefix that is not listed on the title page or
in the Manual Changes supplement, contact your nearest Hewlett-Packard office.
1-13.

SPECIFICATIONS

1-14. Overall specifications for the 5004A are given in Table 7-1.
SECTION I
GENERAL INFORMATION
in Section V.
Model 5004A
This
instrument has been
.