VI. SET THE CT AND VT RATIO
Press the SETUP button several times until CT or VT is shown in reverse video.
Press the
or
or
button will speed up the process of incrementing or decrementing. To
exit, press the EXIT button.
The range of CT ratio is from 1 to 600. The range of VT ratio is from 1 to 3000.
Once the CT or VT is set, the voltage and current readings becomes
CURRENT (displayed) = CURRENT (measured) x CT Ratio
VOLTAGE (displayed) = VOLTAGE (measured) x VT Ratio
button to increment or decrement the value by 1. Holding the
44