Installation Location - Canon RP10 User Manual

Installation Location

For operation, maintenance, and ventilation, make sure that there is
enough space around the printer, as shown in the illustration below.
100 mm (3.9")
100 mm (3.9")
100 mm (3.9")
Avoid placing the printer in the following places. Doing so may result
in malfunctions or incorrect operation.
• Places exposed to direct sunlight
If installation in such places is unavoidable, provide a curtain or
similar object to shade the printer.
• Places subject to dust and fumes
• Places that are uneven, unsteady or subject to vibrations
• Places where corrosive gases or salty winds are generated
When installing the Check Reader CR-150/CR-120 on top of the
printer, make sure that the paper output sections of both the
Document Feeder of the CR-150/CR-120 and the RP10 face in the
same direction, as shown below.
100 mm (3.9")
7