Introduction; Manuals For The Rp10; Symbols Used In This Manual - Canon RP10 User Manual

INTRODUCTION

Thank you for purchasing Canon Thermal Receipt Printer RP10.
The RP10 is a compact high speed thermal receipt printer that
supports high speed printing (150 mm/sec).
The printer is equipped with the automatic leading edge feed function
using the auto cutter and mark detection. At the same time, the printer
automatically adapts to environmental changes to ensure stable print
quality by using the function to detect the voltage and temperature of
the thermal printhead.
You can eject receipts, operate the buttons, and load paper from the
front only. The printer does not require much space and can be
installed even in a limited space.

Manuals for the RP10

The manuals listed below are included with the printer. Please read
them thoroughly before operating the printer.
Setup Guide (Supplied with the printer)
It contains the procedure for getting started with the RP10. For details
about the RP10, see User Manual (Electronic Manual) below.
User Manual (Electronic Manual): This Manual
It contains explanations of everything you need to do to operate the
RP10, from the introduction to the RP10 to basic operations,
maintenance, troubleshooting, etc.
User Manual is included as a PDF file on the CD-ROM*. You need
Acrobat Reader to view the manual. (You can download Adobe
Reader from the Adobe website.)
* May not be supplied depending on the country of purchase.

Symbols Used in This Manual

The following symbols are used in this manual to explain procedures,
restrictions, handling precautions, and instructions that should be
observed for safety.
WARNING
Indicates a warning concerning operations that may lead to death or
injury to persons if not performed correctly. To use the machine
safely, always pay attention to these warnings.
CAUTION
Indicates a caution concerning operations that may lead to injury to
persons, or damage to property if not performed correctly. To use the
machine safely, always pay attention to these cautions.
IMPORTANT
Indicates operational requirements and restrictions. Be sure to read
these items carefully to operate the machine correctly, and avoid
damaging the machine.
NOTE
Indicates a clarification of an operation, or contains additional
explanations for a procedure. Reading these notes is highly
recommended.
4