Table of Contents
Advertisement
Solving Problems
138
while pressing it. Allow a few seconds for the projector to sync up
after changing the setting. Check your notebook's manual or
online help for details.
On most systems, the
screen and the projector, or display on both at the same time.
■
Depending on your computer's video card, you might need to use
the Display utility in the Control Panel to make sure that both the
LCD screen and external monitor port are enabled. See your
computer's documentation or online help for details.
If you're using Mac OS X:
1. Open
System Preferences
2. Click
or
Display
Displays
3. Click
Detect Displays
4. Do one of the following:
Mac OS X 10.6.x users: Click
Other Mac OS X users: Make sure the
dialog box is selected, click the
LCD
tab, then make sure the
The message
Not Supported
■
Depending on the source you're projecting from, make sure the
correct
Input Signal
menu (see page 107).
Make sure your computer's resolution doesn't exceed UXGA
■
×
(1600
1200) and the frequency or refresh rate is supported by
the projector (see page 157). If necessary, change your computer's
resolution setting.
key lets you toggle between the LCD
.
.
.
Show displays in menu bar
VGA Display
Arrangement
checkbox is selected.
Mirror Displays
is displayed.
or
is selected in the Signal
Video Signal
.
or
Color
or
Arrange
Advertisement
Table of Contents
